An acid cleaner for Brewing and Surface Sanitising.
A blend of phosphoric and benzenesulfonic acid and isopropanol.
An excellent sanitizer for manual application.
Not recommended on soft metals because of the acid nature of this product.
Dilution: 0.2%, 10ml to 5 litres of water. Higher concentrations will require a potable rinse. All surfaces should be cleaned and rinsed beforehand. Minimum contact time 2 minutes. The solution should remain at a pH at 3 or below to maintain proper sanitizing level.
If using the diluted solution over time, check the Ph regularly using Ph papers.
Hand Utensils, Tanks, Vats, homebrew use: Scrape or pre-clean dirty surfaces. Clean all surfaces using a suitable detergent, following label directions. Rinse with potable water. Apply diluted solution on surfaces with a cloth, mop, brush, sponge, spray or by immersion. After 2 minutes contact time, drain solution thoroughly. For all applications, allow to air dry, however surfaces must remain wet for at least two minutes. Do not rinse after Chemsan application.